Sanyo TV Codes for Spectrum Remote

Tired of looking through a heap of remotes every time you want to watch TV or listen to some music in your living space? Tired of looking at the numerous remotes, only two of which are actually used and the rest just sit there collecting dust? Tired of losing your TV remote and looking for the right one with the right controls that would work with your TV?

If your answer to any of these questions is ‘Yes’, the Spectrum universal remote is the perfect solution for you and we are going provide programming steps and sanyo tv codes for spectrum remote. Declutter your living space and bring about some extra convenience and comfort in your living space with the Spectrum universal remote. It can help you control up to 5 different audio and video devices including TVs, DVD players, radio devices, soundbars, home theatre systems and more with a single remote in your hand. It can be set up very easily and can be used even by the least tech savvy people out there with its clear buttons and all necessary functions. 

Spectrum Remote Codes for Sanyo TV List

As we said, setting up your Spectrum remote is super easy, all you need to do is press a few buttons and input the right code and you would be all set to use your new remote. If you own a Sanyo TV and recently purchased a Spectrum remote to go with it, here is a list of Spectrum Sanyo TV codes to help you find the right one for your model.

  • 11142
  • 12049
  • 11480
  • 11454
  • 11564
  • 10088

To program Spectrum remote to Sanyo TV, you can also find the right code in the manual that comes with the remote or on their website very easily. However, these codes will also differ depending on the model of remote that you have. Worry not, we have made it super easy for you with these curated lists fit for their respective models. You can find the model number on the box that the remote came in, or in the manual that came with it.

Spectrum RC122 Remote Codes for Sanyo TV

If you have an RC122 remote, you can refer to this list of Spectrum Sanyo TV codes to find the right code for programming the remote to your TV.

  • 1014
  • 1008
  • 1052
  • 1097
  • 1109

Spectrum URC1160 Remote Codes for Sanyo TV

If you have an RC122 remote, you can refer to this list of Spectrum Sanyo TV codes to find the right code for programming the remote to your TV.

  • 11142
  • 10154
  • 10088

How to Program Spectrum Remote to Sanyo TV

Once you bring your Spectrum remote home, you have to pair it with your desired devices to actually put it into use. Coding, programming, pairing may all seem like complicated and confusing terms, but worry not, here is an easy-to-understand guide that will help you understand how to program Spectrum remote to Sanyo TV in a matter of a few minutes.

  • Step 1: To program Spectrum remote to Sanyo TV, you first have to turn the TV on and ensure that the remote has batteries. Once you have taken care of that, you can move on to the next step.
  • Step 2: Locate the TV button and OK/SEL button on the remote. Press and hold them together for 3 seconds. If the TV button does not light up, repeat this step until it does.
  • Step 3: Hold up your remote and point it towards your Sanyo TV.
  • Step 4: Now, enter the right code for your device that you found from the lists above in the remote. These codes can be found in their manual, website or in the lists above.
  • Step 5: If the TV gets turned off, you have entered the right code and the remote is now programmed. Try turning it back on with the remote and using some of its functions to know for sure.

And that is how easy it is to program the Spectrum remote with pretty much any device. Go on and lead your newly organised, tech savvy and tidy lifestyle.

Leave a Comment