Handling several remotes for different devices is literally a typical task. Spectrum universal remote control is the perfect solution for this mess. It is an accessible, affordable, and reliable brand for universal remotes, which can operate all the electronic devices at your home including your Samsung Soundbar and let you enjoy your entertainment time. So, if you have a Samsung soundbar at home and you are searching for information to program it with Spectrum remote, then you will get brief information about the codes and programming method further in this article.
Samsung Soundbar 4 Digits Remote Code for Spectrum
Samsung soundbar has a different set of codes that vary with different universal remote brands. It usually works with 1, 2, 3, 4 and 5 digits remote codes for all the brands but sometimes you are required to have a 4 digits code to pair your remote control.
- 3449
- 3474
- 3515
Samsung Soundbar Codes for Spectrum Remote
A Samsung soundbar can be programmed easily with Spectrum universal remote control if you have the correct programming guide and remote codes. It is necessary to have remote codes to sync various devices with a universal remote such as TV and DVD etc.. Similarly, you need to have Samsung soundbar codes to pair up with Spectrum universal remote control and for Vizio Soundbar. We have listed down various sets of Spectrum remote codes that can control your Samsung soundbar.
- 31295
- 31304
- 31500
- 31868
- 22660
Spectrum RC122 Remote Codes for Samsung Soundbar
If you are looking for RC122 digits remote codes for the Spectrum universal remote control, you can check the codes in the table given below. By entering any of these RC122 digits codes, you can easily program your Samsung soundbar and enjoy your musical time. Additionally, if you need to connect a soundbar from another brand, you can use Spectrum remote soundbar codes for a seamless setup.
3449
3474
3515
Spectrum URC1160 Remote Codes for Samsung Soundbar
21868
22137
22660
How To Program Spectrum Remote To Samsung Soundbar
Programming the Samsung soundbar with the Spectrum universal remote control is a very easy task. You just need to have a working remote with properly installed new batteries. Here, we have provided a clear method for pairing the Samsung soundbar with the Spectrum remote using specific codes. To do this, you will need a 4-digit remote code, which you can find in the table above. Simply follow the steps mentioned below. Similarly, if you are looking to pair a Sharp TV, you can use the appropriate codes provided for that model as well.
- Switch on your Samsung Soundbar.
- Press and hold the Select/OK button and Soundbar key on the remote until all the device keys blink twice.
- Now enter the 4 digits code you found on the table given above. At this point, all device keys will blink three times to indicate that the code you have entered was accepted.
- Now to test whether the Samsung soundbar is working or not, aim the remote towards the Soundbar and press the Power, Play, Volume and Channel buttons.
- If your soundbar is operating on your command, means the code you entered was correct. If the system is not working, then repeat the process from Step 1.
Final words
You can easily access your Samsung soundbar with Spectrum remote and control all the functions of the device same like Bose Soundbar. in this article, we have tried to cover all the necessary information about the programming method and codes required to operate the Samsung soundbar with Spectrum Universal remote. Hope you get answers to all your queries, in case we missed to cover any topic, then we are open to receiving feedback from you.