Samsung Soundbar 4 Digit Remote Code for Spectrum

Handling several remotes for different devices is literally a typical task. Spectrum universal remote control is the perfect solution for this mess. It is an accessible, affordable, and reliable brand for universal remotes, which can operate all the electronic devices at your home including your Samsung Soundbar and let you enjoy your entertainment time. So, if you have a Samsung soundbar at home and you are searching for information to program it with Spectrum remote, then you will get brief information about the codes and programming method further in this article.

Samsung Soundbar 4 Digits Remote Code for Spectrum

Samsung soundbar has a different set of codes that vary with different universal remote brands. It usually works with 1, 2, 3, 4 and 5 digits remote codes for all the brands but sometimes you are required to have a 4 digits code to pair your remote control.

  • 3449
  • 3474
  • 3515

Samsung Soundbar Codes for Spectrum Remote

A Samsung soundbar can be programmed easily with Spectrum universal remote control if you have the correct programming guide and remote codes. It is necessary to have remote codes to sync various devices with a universal remote. Similarly, you need to have Samsung soundbar codes to pair up with Spectrum universal remote control. We have listed down various sets of Spectrum remote codes that can control your Samsung soundbar.  

  • 31295
  • 31304
  • 31500
  • 31868
  • 22660

Spectrum RC122 Remote Codes for Samsung Soundbar

If you are looking for rc122 digits remote code for Spectrum universal remote control, then you can check these codes on the table given below. By entering any of these rc122  digits codes you can easily program your Samsung soundbar and enjoy your musical time.

  • 3449
  • 3474
  • 3515

Spectrum URC1160 Remote Codes for Samsung Soundbar

  • 21868
  • 22137
  • 22660

How To Program Spectrum Remote To Samsung Soundbar

Programming the Samsung soundbar with Spectrum universal remote control is a very easy task. You just need to have a working remote with properly installed new batteries. Here we have mentioned a proper method of pairing the Samsung soundbar with the Spectrum remote using codes. For this, you need to have a 4 digits remote code first, which you can find in the table given above and then follow the steps mentioned below:

  1. Switch on your Samsung Soundbar.
  2. Press and hold the Select/OK button and Soundbar key on the remote until all the device keys blink twice.
  3. Now enter the 4 digits code you found on the table given above. At this point, all device keys will blink three times to indicate that the code you have entered was accepted.
  4. Now to test whether the Samsung soundbar is working or not, aim the remote towards the Soundbar and press the Power, Play, Volume and Channel buttons.
  5. If your soundbar is operating on your command, means the code you entered was correct. If the system is not working, then repeat the process from Step 1.  

Final words

You can easily access your Samsung soundbar with Spectrum remote and control all the functions of the device. in this article, we have tried to cover all the necessary information about the programming method and codes required to operate the Samsung soundbar with Spectrum Universal remote. Hope you get answers to all your queries, in case we missed to cover any topic, then we are open to receiving feedback from you.  

Leave a Comment