Spectrum universal remote is popular for its accessibility to all devices. If you got a spectrum remote for your home theatre then be ready to binge-watch your favorite shows because it will give a perfect entertainment experience. You will get all the necessary details about pairing your device to the remote further in this article.
Every universal remote requires a code to pair with electronic devices. These codes can be of 2, 3, 4, and 5 digits, based on the brand and model of the device you want to connect it, and sometimes the code can be just a “0”. If you have TCL Roku TV at home and want to operate it using the Spectrum remote, then you need to have a code that will program your TV unit to the remote.
Spectrum Remote Codes for TCL Roku TV List
There are various codes available online and in the manual of the Spectrum remote to connect different devices with it. But it becomes tough to search for codes that will work for your TV set. So, to lower your burden, we have prepared a complete list of verified and working codes that will connect your TCL Roku TV to the Spectrum remote. Go through the code list for Roku TV given below.
Spectrum RC122 Remote Codes for TCL Roku TV
Spectrum RC122 universal remote is compatible with devices of all brands including your TCL Roku TV and that too with a simple programming method. But to sync Roku TV with the Spectrum remote, you will be required to have a correct code that will allow the setting of your TV to connect with the remote. Given below is a list of codes to pair your Roku TV.
Spectrum URC1160 Remote Codes for Roku TV
This model of the Spectrum remote is best to connect with your TCL Roku TV. For your convenience, we have prepared a list of Spectrum URC1160 codes that will easily sync your Roku TV to the remote. You can go through the list given below and start programming your Roku TV.
How to Program Spectrum Remote to Roku TV
Programming Spectrum universal remote control to TCL Roku TV is a very smooth task. You just need to follow a simple guideline of a few steps that will connect your TV to the remote in a couple of minutes. Now, if you are ready to pair the remote to the TV, then make sure your remote is working properly and has new batteries.
- Switch on your TCL Roku TV.
- Now press the Menu and OK keys simultaneously, until the input key blinks two times.
- Now enter the code for your TV brand and model using the number pad on your Spectrum remote
- Next, press the TV key on the remote once.
- Lastly, long-press the number code for the TV until the TV gets switched off.
- To check if the remote is successfully paired with your TCL Roku TV, press buttons like CH+ and CH-. If the channel changes, means you have successfully programmed your remote.
In case it does not work then repeat the steps.
Sometimes it sounds tough when someone says to set up your brand new remote to your desired device, but it’s a super-easy task. This article has all the detailed instructions and information about codes and programming guides that will help you to connect your Roku TV unit to the Spectrum universal remote control. If you still have any queries about the Spectrum remote then you can talk to our customer service which is available 24*7 to help you out.