Spectrum Remote Codes for Sony TV

The universal remote control is a blessing for people who think searching the entire home just for a remote is wasting of time. These remotes can be paired up with all the devices at your home and can operate them simultaneously. Spectrum universal remote control is the best choice when you have multiple devices of any brand at home. You can even sync the remote to your Sony TV unit and have a great TV watching experience.

Spectrum Sony Tv Universal Remote Codes List

There are various codes that can pair Spectrum universal remote to your Sony TV. These codes vary from 1, 2, 3, 4 and 5 digits codes for different models of the remote. So, out of all the codes, we have prepared a list of codes that are correct and working. Now, what are you waiting for? Check out the list given below and start programming your Sony TV to Spectrum remote by entering codes one by one.

  • 10810
  • 11685
  • 1000
  • 1064
  • 1152
  • 1218
  • 1178
  • 1288
  • 1326
  • 1370

Spectrum universal remote comes with numerous codes to get paired up with any device. It’s easy to control feature makes it everyone’s favourite. The remote can easily connect to your Sony TV unit and control all the functions of the TV. In this article, you will learn about the programming guide for connecting Sony TV to Spectrum remote control along with various pairing codes for your TV unit.

Spectrum Remote Codes for Sony DVD Player List

Besides TV, you can also program your Sony DVD player to the spectrum universal remote and that too with a simple programming method. You just need to have a code to connect your DVD player to the remote. So, to ease your burden of searching for a Sony DVD player code, we have collected all the working codes and prepared a list for the same. You can check the code list mentioned here and sync the Sony DVD player to the Spectrum remote.  

  • 21622
  • 22172
  • 20158
  • 23903
  • 23700
  • 22582
  • 23487

How To Program Spectrum Remote To Sony TV

Programming Sony TV to Spectrum remote is a very easy task and it can be done by following a few simple steps. So, if you are looking for the procedure, then stop, we have written down the entire process here. You can follow this programming method and enjoy your TV time.

  1. Turn on your TV: Start by ensuring your TV is powered on. This is necessary to verify the programming of the remote control later.
  2. Enter Programming Mode: On your Spectrum remote, find the “Menu” and “OK” buttons. Press and hold these two buttons at the same time. You’ll notice that the “Input” key on your remote will flash twice, indicating that the remote is ready to be programmed.
  3. Activate the TV Power Function: Next, press the “TV Power” button on your remote. A solid light will appear on the remote, signifying that the TV Power function has been activated.
  4. Begin the Code Search: Now, point your Spectrum remote towards your TV. Press the “UP” arrow button on the remote. The remote will start searching for the correct code to control your TV.
  5. Save the Code: As the remote is searching, your TV will eventually power off. When this happens, immediately let go of the “UP” arrow button. This action will cause the remote to save the code it was using when the TV turned off.

After these steps, your Spectrum remote should be programmed to control your TV. Test the remote with your TV to ensure all functions work properly. If any function doesn’t work, you may need to repeat the process.

Resetting Your Spectrum Remote

To reset your Spectrum remote to its default settings:

  1. Remove the batteries.
  2. Unplug your Spectrum receiver and Sony TV from the power source.
  3. Wait at least 60 seconds.
  4. Reconnect the power to both devices and reinsert the batteries.

Attempt to sync the remote with your Sony TV again following the aforementioned syncing steps. If problems persist, contact Spectrum support for further assistance or consider replacing your remote.

Troubleshooting Common Issues

When your Spectrum remote is not working as expected with your Sony TV, there are several specific steps you can undertake to address common issues.

Syncing Issues with Sony TV

If your Spectrum remote is having trouble syncing with your Sony TV, ensure that the TV is powered on. Hold down the Setup button on the remote until the LED light blinks twice. Enter the manufacturer’s code for your Sony TV. If the code is correct, the LED should blink twice to confirm syncing. If the LED does not blink, or the remote does not operate the TV, try a different code from the Spectrum remote code list for Sony TVs.

Replacing Batteries and Maintenance

For optimal performance, regularly check your remote’s batteries. When the remote’s response becomes sluggish, replace the batteries. Always use fresh batteries and ensure they are correctly inserted according to the polarities marked inside the battery compartment. Keep the remote’s sensor free from dust and debris, which can obstruct the signal.

Final Words:

We hope, you found this article very useful for you. Here, we have tried to briefly explain the programming procedure and codes to connect Sony TV to Spectrum universal remote control. If you still have any issue handling the remote or syncing process, then you can comment below or you can talk to the customer care which is available 24*7 for your service.  

Leave a Comment