Spectrum remote is among the top-selling universal remotes in the country. It provides the best service that you desired to have in a universal remote. The best feature of this remote is that it can easily be synced up with all the brands and devices. If you got one for yourself, then you surely going to love its amazing features when you will explore the remote more. However, this experience only begins when you set up Spectrum remote to your device. So, here we will give you brief guidance about the remote codes for TCL TV and its programming procedure.
TCL Spectrum Universal Remote Codes
As we said, Spectrum is a universal remote and can be programmed with any device easily including a TCL TV unit. If you have TCL TV at home and want to connect it to Spectrum remote, then don’t worry we have a complete list of codes and a programming guide that will let you set up your TV to the remote in a few minutes.
- 11756
Spectrum TCL Remote Codes List
To make the entire programming method easy for you, we have selected the working codes for TCL TV and prepared the list of these codes. You can check these codes in the table given below and start programming your TV. As all the codes in the table are working, so you can use them freely and complete your mission.
- 1098
- 1228
TCL Soundbar Remote Code Spectrum List
Apart from TV, you can also pair the Spectrum universal remote to your TCL Soundbar. As you need a code to pair any device, you will similarly need a code to sync the TCL Soundbar to the Spectrum remote. You can check these codes to set up the TCL Soundbar in the list given below and for samsung soundbar check this article. Additionally, if you are pairing the remote with a TCL Roku TV, you’ll find the necessary codes for that as well.
- 11756
- 12434
- 14398
- 13938
- 10885
- 12049
- 11447
- 12360
- 10178
- 12183
- 11423
How To Program Spectrum Remote to TCL TV
To program TCL TV from your Spectrum remote, you must have a 4 digits code. You can find the code from the list given above and follow the instructions step by step which is mentioned below and incase you need how to program spectrum remote to tcl roku tv then here you go and your TV will be all set to be programmed with the Spectrum universal remote.
- Switch on your TCL TV.
- Now press the TV Power key.
- Press and hold TV SEL until the key blinks twice.
- Next, start with entering the first TV code from the list.
- Press the Power button to check if the remote has synced with the TV. If the TV turns off, means the process was successful.
- In case it doesn’t turn off, try another code from the list by following the entire steps again.
How To Program TCL TV For Spectrum Universal Remote With manual Method
In case you couldn’t find the correct code, you can opt for a manual method to set up your TCL TV to Spectrum remote. Given below are the steps for the manual method. If you have a Hisense TV, you can use the specific Spectrum remote code for Hisense to ensure proper setup.
- Turn on the TV.
- Now first press the TV button, and then OK/SEL keys simultaneously for 3 seconds until the TV LED lights for 30 seconds.
- Point your remote at your TV and enter the TV brand’s number. If there is more than one code, start by entering one code at a time until your device turns off. However, you should wait for one second before entering each code.
- Press the Power button to check if the remote has synced with the TV. If the TV turns off, means the process was successful.
- Now press the Device key to lock the code. If the device LED will blink twice, means the code has been locked.
Final words:
Once you get the epic Spectrum remote, the only thing that is holding you to binge-watching your favourite shows on TV is the programming process. So, to resolve this issue, we have mentioned all the super-easy, step-by-step instructions and codes in this article. Now, put your thinking cap on and set up your TCL TV.